Need help?Do you have a question about the Banner SC26-2e and is the answer not in the manual?
General| Brand | Banner |
|---|---|
| Model | SC26-2e |
| Category | Controller |
| Language | English |
Crucial preliminary information for safe and compliant use of the safety controller.
Details available XS/SC26-2 base models and their expansion module options.
Identifies and explains the features and indicators on the XS/SC26-2 safety controller.
Describes the ATO feature that automatically combines I/O terminals for devices.
Lists SC10-2 models and their descriptions, highlighting its capabilities.
Identifies and describes the features and indicators of the SC10-2 safety controller.
Explains how ATO works with ETBs to expand input capacity on the SC10-2.
Provides detailed electrical, mechanical, and environmental specifications for XS/SC26-2 modules.
Lists detailed electrical, mechanical, and environmental specifications for the SC10-2 controller.
Explains how safety input devices are monitored and the importance of fault detection.
Details various types of safety input devices and their circuit configurations for safeguarding.
Outlines the essential steps for creating and confirming a controller configuration.
Describes how to add safety, non-safety inputs, and status outputs using the software interface.
Guidance on building control logic using logic and function blocks within the software.
Procedures for saving, confirming, and writing configurations to the safety controller.
Enables real-time monitoring of device states, inputs, outputs, and faults via PC software.
Allows testing of controller configurations without actual hardware connection.
Accessing configuration mode via the onboard interface to manage configurations on SC-XM2/3 drives.
Outlines the required checks for verifying system operation and safety functions.
Details the procedure for commissioning the safety controller and its associated systems.
Procedure to reset the SC10-2 controller to its original factory default settings.
Addresses common issues encountered with the Safety Controller Software and their solutions.
Lists and explains error codes generated by invalid block connections in the software.
Discusses common faults detectable by the Safety Controller and methods to resolve them.
To Next Page
