EasyManua.ls Logo

Banner SureCross DX80 - Specifications

Banner SureCross DX80
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Radio
Range
900 MHz: Up to 4.8 kilometers (3 miles) *
2.4 GHz: Up to 3.2 kilometers (2 miles) *
Transmit Power
900 MHz: 21 dBm conducted
2.4 GHz: 18 dBm conducted, less than or equal to 20
dBm EIRP
900 MHz Compliance (150 mW Radios)
FCC ID TGUDX80 - This device complies with FCC
Part 15, Subpart C, 15.247
IC: 7044A-DX8009
2.4 GHz Compliance
FCC ID UE300DX80-2400 - This device complies with
FCC Part 15, Subpart C, 15.247
ETSI/EN: In accordance with EN 300 328: V1.7.1
(2006-05)
IC: 7044A-DX8024
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
Antenna Connection
Ext. Reverse Polarity SMA, 50 Ohms
Max Tightening Torque: 0.45 N·m (4 in·lbf)
Link Timeout
Gateway: Configurable
Node: Defined by Gateway
* With the 2 dB antenna that ships with the product. High-gain an-
tennas are available, but the range depends on the environment
and line of sight. To determine the range of your wireless network,
perform a Site Survey.
General
Power*
Requirements: +10 to 30V dc or 3.6 to 5.5V dc low
power option (For European applications: +10 to 24V
dc, ± 10% or 3.6 to 5.5V dc low power option)
Consumption: Less than 1.4 W (60 mA) at 24V dc
Housing
Polycarbonate
Weight: 0.26 kg (0.57 lbs)
Mounting: #10 or M5 (M5 hardware included)
Max. Tightening Torque: 0.56 N·m (5 in·lbf)
Interface
Indicators: Two bi-color LEDs
Buttons: Two
Display: Six character LCD
Wiring Access
Four PG-7, One 1/2-inch NPT, One 5-pin Euro-style
male connector
* For European applications, power the DX80 from a Limited Pow-
er Source as defined in EN 60950-1.
Inputs
Discrete Input Rating
3 mA max current at 30V dc
Discrete Input Sample/Report Rates
125 milliseconds
Discrete Input ON Condition
PNP: Greater than 8V
NPN: Less than 0.7V
Discrete Input OFF Condition
PNP: Less than 5V
NPN: Greater than 2V or open
Counter Inputs
Threshold: 1.5V or 0.25V (Sinking or sourcing selected
inputs require the 1.5V threshold setting)
Debouce: DIP Switch Selectable. Enable debounce to
filter a noisy input signal that may lead to false triggers.
Event Counter: Input rating 1 Hz to 10 kHz (For battery
powered devices, the recommended input rating is less
than 1 kHz)
Rate (Frequency) Counter: 1 Hz to 25 kHz
Threshold (sinking counter on Performance and Multi-
Hop models) : 1.7V
Outputs
Discrete Output Rating (NMOS)
Less than 10 mA max current at 30V dc
Discrete Output OFF Condition
Open
SureCross DX80 FlexPower Node with Counter Inputs
12 www.bannerengineering.com - tel: 763-544-3164 P/N 136348 rev. G

Other manuals for Banner SureCross DX80

Related product manuals