Display
NiMH CYCLE
DCHG>CHG 3
Display
Charge-to-discharge & discharge-to-charge cycle NiMH/NiCd battery
Set the sequence on the left and the number of cycle on
the right. You can use this function for balancing,
refreshing and break-in the battery. To avoid rising
temperature of the battery, there will a brief cool-off
period that already fixed at 'User setting' after each
charge and discharge process. The cycling number
ranges from 1 to 5.
To stop the process, press key once.
You can change the discharge or charge current by
pressing key once during the process. The audible
sound indicates you the end of process.
Display
DCHG 1 1314mAh
CHG 1 1430mAh
At the end of the process, you can see charged or
discharged electric capacities of the battery at each
cyclic process.
By pressing or button, the screen shows the
result of each cycle in order.
NiMH 1.0A 7.42V
D>C 022:45 00890
+-+-
'> 3 seconds'
Start
Enter
Batt type
Stop
DEC
◀
INC
▶
DEC
◀
INC
▶
battery
voltage
discharge
or charge
current
discharged
or charged
capacity
elapsed
time
battery
type
Start
Enter
Batt type
Stop
DEC
◀
INC
▶
- 14 -
To Next Page
Loading...
