Introduction
Thank you for selecting the TB200 laboratory turbidity meter. This meter operates on the nephelometric principle of turbidity measurement and is
designed to meet the criteria specified in ISO 7027. This manual provides a step-by-step guide to help you operate the meter, please carefully
read the following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meets the following conditions.
• Relative humidity is less than 80%.
• Ambient temperature is greater than 0° C/32° F and less than 50° C/122° F.
• No potential magnetic fields and ambient light interference.
The following list describes the standard components of meter. After the unpacking, please check all components are complete. If any are
damaged or missing, please contact the supplier.
The sample vial in the measurement chamber has been indexed with the 0.02 and 10 NTU standards at the factory.
• TB200 turbidity meter • Calibration standards • Sample vials • Lint-free cloth
• DC12V power adapter
To Next Page
Loading...
