Need help?Do you have a question about the Bante Instruments 9 Series and is the answer not in the manual?
General| Model | 9 Series |
|---|---|
| Measurement Parameters | pH, ORP, Conductivity, TDS, Salinity, Resistivity, Temperature |
| pH Range | 0.00 to 14.00 pH |
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| ORP Resolution | 1 mV |
| Display | LCD |
| Conductivity Accuracy | ±1% of reading |
| TDS Accuracy | ±1% of reading |
| Salinity Accuracy | ±1% of reading |
| Resistivity Accuracy | ±1% of reading |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Calibration Points | Up to 5 points |
| Memory | 500 data sets |
| ORP Range | -1999 to 1999 mV |
Step-by-step guide for connecting various types of electrodes.
Information on calibrating the temperature probe for accurate readings.
Guides through the process of calibrating the pH measurement.
How to perform pH calibration using custom buffer solutions.
Instructions for preparing standard buffer solutions for pH calibration.
Detailed steps for performing pH measurements accurately.
Procedure for taking mV measurements with the ORP electrode.
Step-by-step guide for calibrating the ORP measurement.
Step-by-step guide for calibrating the ion measurement.
Procedure for performing ion concentration measurements.
Step-by-step guide for calibrating water hardness measurements.
Step-by-step guide for calibrating conductivity measurements.
Step-by-step for calibrating dissolved oxygen in concentration units.
Instructions for cleaning and storing the dissolved oxygen electrode.
Guides through calibration for dissolved oxygen in different modes.
Step-by-step for calibrating dissolved oxygen in saturation percentage.
Lists common faults and their corrective actions for the meter.
To Next Page
