Baoli CPD10 User Manual (English)

Questions and Answers:

D
Derrick JonesAug 6, 2025
Why does the capacity of my Baoli CPD10 battery drop suddenly?
- R
  Robert TurnerAug 6, 2025
  A sudden drop in capacity in your Baoli Forklifts battery can occur for several reasons: insufficient charge ('Balanced charging, improve the operating way'), low electrolyte density ('Adjust the density of electrolyte'), high resistance in the connecting line ('Unblock the outer connection line and reduce the resistance'), sulphated pole plates ('Charging repeatedly to exhaust the condition of sulphating'), harmful matter in the electrolyte ('Check electrolyte, replace it if necessary'), a localized short circuit ('Check and remove'), or an inner or outer short circuit in the battery ('Check and remove').
B
browncandaceAug 11, 2025
What to do if the temperature of electrolyte is high in Baoli CPD10 Forklifts?
- F
  fmooreAug 11, 2025
  If the electrolyte temperature is high in your Baoli Forklifts, it could be due to too large a current or a short circuit during charging ('Adjust the charging current or exhaust the short circuit'), or sulphated pole plates ('Exhaust the condition of sulphating').
J
John PonceAug 18, 2025
What causes abnormal gas emission in Baoli Forklifts?
- K
  kevin84Aug 18, 2025
  Abnormal gas emission in Baoli Forklifts can be attributed to low charging current or insufficient charging ('Adjust charging current and go on charging'), a short circuit within the battery ('Repair the short circuit'), sulphated pole plates ('Exhaust the condition of sulphating'), or if there's no laying after charging, or there is matter in electrolyte ('Discharge or replace electrolyte after laying for 1 hour').