Ⅱ. Safety instruction, operation & maintenance of electric forklift
truck
It is important for drivers and managers to remember the principle of “first safety” and
ensure the safety operation as the description of Operation & Service Manual. Please
read this manual thoroughly. This will give you a complete understanding of Baoli forklifts
and permit you to operate them correctly and safely.
2.1 Shipping, loading, unloading and slinging of forklift truck
2.1.1 Ship the forklift truck
(1) Apply the parking brake when shipping the forklift trucks by container or freight
car.
(2) Fix the mast and the balance weight with steel wire and use jacks to prevent the
forklift trucks from moving in the cabin.
(3) Pay attention to the overall length, width, height when loading, unloading and
shipping and conforming the regulations is necessary.
(4) Single transporting if necessary after disassembling the mast and balance weight.
2.1.2 Load and unload the forklift truck
(1) Use the plate with enough length, width and strength.
(2) Pull the parking brake and use jacks to stop the wheel.
(3) Fasten the plate on the center of the cabin, there must be no grease on the plate.
(4) The left and right height of the plate must be equal to make the loading and
unloading smooth.
(5) Don’t change the direction on the plate to prevent the danger.
(6) Reverse the truck slowly when loading the forklift on the freight car.
2.1.3 Sling the forklift truck
(1) Only the specially trained personnel can sling the truck.
(2) Sling points should be always at the positions specified in sling index plate.
(3) The slinging cable must be enough to hang the forklift truck.
(4) Disassembled parts of forklift truck must be slinged in appointed position.
To Next Page
Loading...
