Baoli CPD10 - Page 20

15
Refer to Manual of Battery about charging method and maintenance.
2.5.4 Essentials of servicing
(1) Some critical components must be replaced according to demands periodically.
Use genuine parts only.
(2) Use genuine or recommended oil only when replacing or adding.
(3) If any damage or fault is found, the matter should be reported to the manager.
Only trained and authorized serviceman shall be permitted to service the truck. Do not
operate the truck until the truck has been repaired completely.
(4) Maintain the motor, electric controller and battery according to their manuals.
(5) Check all plugs once a month.
(6) Don’t wash the truck with a water syringe. Outdoor using the truck in rainy day is
forbidden.
(7) Clean the dust of photoelectric coupler of the hydraulic motor switch.
(8) Clean and dry the surface of the battery usually.
(9) Periodic maintenance must be done according to the following list after using the
forklift truck.
No.
Item
Contents
Period
(hrs.)
Remark
1
Bearing, steering wheel
Replace grease
1000
2
Bearing, drive wheel
Replace grease
1000
3
Steering link lever
Replace grease
1000
4
Parking brake lever
Add grease
200
5
Pin, foot brake
Add grease
200
6
Drive axle body
Replace gear oil
2400
7
Braking oil
Add
Whenever
necessary
8
Pin, tilting cylinder
Add lubricating grease
400
9
King pin of knuckle
Replace grease
1000
10
Hydraulic tank and filter
Clean
1000
11
Hydraulic oil
Replace
1000
12
Lift chain
Replace
3000
If damaged,
Replace it.
13
H. P. hose
Replace
3000
14
Switch, hydraulic motor
Clean photoelectric coupler
200
15
Brush, traction motor
Check
1000
16
Brush, hydraulic motor
Check
1000
17
Brush, P.S. motor
Check
1000