5.8.1 Settings > Pin Code sub menu
PIN code enable: The PIN code is disabled by default. If you want to enable/disable the PIN code
you have to enter the current PIN (Default PIN: 1234). When completed you can
enable or disable the use of PIN code. If PIN is entered incorrectly 3 times, it
will ask for a PUK code, which is provided in printed form in the box. If the PUK
is entered incorrectly it will require a special unlock code provide by a service
partner to unlock the projector.
change PIN code: To change the PIN code you first have to enter the current PIN code (Default PIN:
1234). Then you enter a new 4 digit code and confirm this code by entering the
same code again. Click OK and the new code is set.
To Next Page
Loading...
