47
5.10.3 Status > Source Synchronisation sub menu
3D: Indicates which 3D mode is used.
2D frame lock: Indicates what the projector locks to in 2D
frequency: Shows the current frequency of the locking signal
status: Indicates the locking status
phase: Indicates phase between the source and the locking signal
3D source sync: Indicates where the source L/R sync is connected
source has in-band sync: Indicated if the source has embedded L/R sync, only
supported on DisplayPort
frequency: Shows the current frequency of the signal
duty cycle: Shows the duty cycle of the signal
status: Indicates the sync status
phase: Indicates phase between the source and the L/R sync signal
3D display sync: Indicates what the projector locks to in 3D
frequency: Shows the current frequency of the locking signal
duty cycle: Shows the duty cycle of the signal
status: Indicates the locking status
phase: Indicates phase between the source and the locking signal
To Next Page
Loading...
