7.1.2 RealColor™ modes
Before any color correction is applied to the image, RealColor™ must be enabled. Go to
menu PICTURE > REALCOLOR > COLOR CORRECTION to enable RealColor™.
RealColor™ can operate in 3 modes:
• Color temperature/white point correction only.
• Red, Green, Blue, White correction. In this mode optimal color coordinates for Cyan,
Magenta and Yellow will be computed automatically.
• Red, Green, Blue, Cyan, Magenta, Yellow, White. In this mode color points and intensity
for each color can be manipulated separately.
To change the RealColor™ mode please go the menu PICTURE > REALCOLOR > DE-
SIRED VALUES > DESIRED COORDS MODE.
CT series User Manual - Optimising the image
To Next Page
Loading...
