Barco Eonis MDRC-2321 - Page 7

R5910551 /00 Eonis 7
3. Front sensor
4. Power status LED
• Off: Display not powered, or display is on but power LED function is disabled in OSD (see “Power
status LED”, page 15)
• Steady green: Display operational
• Blinking green: Display is entering standby mode
• Steady orange: Display in standby mode
Back
8
9
1 2 3 4 6 75
Image 1-2
1. Kensington security slot
2. USB-B 2.0 upstream connector
3. USB-A 2.0 downstream connectors (2x)
4. DisplayPort video input
5. Earth pin
6. DVI-I video input
7. 100 - 240 VAC mains power input (IEC C14)
8. Height-adjustable cable routing clip
9. VESA 100 mm mounting screw holes (4x)
Welcome!