R5910550 /00 Eonis10
2.1 Cable connections
To connect the cables
1. Connect one or more video source(s) to the corresponding video inputs. Use the appropriate video cable
(s) to do this.
The input source to be displayed can be selected in the OSD menu (see “Input source selection”, page 15).
Image 2-1
2. Connect the USB upstream connector to a PC USB host to make use of QAWeb or any of the display USB
downstream connectors (e.g. to connect a keyboard, mouse or other peripheral).
Image 2-2
3. MDRC-2324 (option SNIB, STIB, HNIB and HTIB): Connect the mains power input to a grounded power
outlet.
Image 2-3
MDRC-2324 (option HNEW, HTEW and HPEW): Connect the supplied external DC power supply to the
+12 VDC power input of your display. Then plug the other end of the external DC power supply into a
grounded power outlet by means of the proper power cord delivered with your display.
Installation
To Next Page
Loading...
