EasyManua.ls Logo

Barco Eonis MDRC-2324 - Technical Specifications

Barco Eonis MDRC-2324
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R5910550 /00 Eonis 35
Trademarks
All trademarks and registered trademarks are property of their respective owners.
Copyright notice
This document is copyrighted. All rights are reserved. Neither this document, nor any part of it, may be
reproduced or copied in any form or by any means - graphical, electronic, or mechanical including
photocopying, taping or information storage and retrieval systems - without written permission of Barco.
© 2019 Barco NV all rights reserved.
5.8 Technical specifications
Overview
Screen technology LCD
Active screen size
(diagonal)
609.6 mm (24")
Active screen size (H x V) 518.4 mm x 324.0 mm (20.4 x 12.8")
Aspect ratio (H:V) 16:10
Resolution 2MP (1920 x 1200 pixels)
Pixel pitch 0.270 mm
Color imaging Yes
Gray imaging Yes
Bit depth 30 bit
Viewing angle (H, V) 178°
Ambient light presets Yes, reading room selection
Front sensor Yes, Front Consistency Sensor
Maximum luminance 600 cd/m²
DICOM calibrated luminance Standard brightness versions (MDRC-23234 (option Sxxx)): 250 cd/m²
High brightness versions (MDRC-2324 (option Hxxx)): 350 cd/m²
Contrast ratio (panel typical) 1000:1
Response time ((Tr + Tf)/2)
(typical)
7 ms
Housing color Black versions (MDRC-2324 (option xxxB)): RAL 9004
White versions (MDRC-2324 (option xxxW)): RAL 9016
Video input signals 1 x DP, 1 x DVI-I
USB ports 1x USB 2.0 upstream (endpoint)
2x USB 2.0 downstream
Power rating Black versions (MDRC-2324 (option xxxB)): 100-240 VAC, 50/60 Hz, 0.7-
0.4A
White versions (MDRC-2324 (option xxxW)): 12 VDC, 2.3A
Power requirements White versions (MDRC-2324 (option xxxW)): This device shall only be
powered by the following medical approved power supply:
Adaptertec, type PCL722A
Important information

Related product manuals