Barco Eonis MDRC-2324 - OSD Menu Orientation; Factory Reset Procedure; Touchscreen Functionality

R5910550 /00 Eonis 19
3.15 OSD menu orientation
About the OSD menu orientation
The orientation of the OSD menu can be changed depending on the orientation of your display (landscape or
portrait).
To change the orientation of the OSD menu
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the OSD orientation submenu.
4. Select Landscape or Portrait as desired and confirm.
3.16 Factory reset
About factory reset
A factory reset allows you to fully restore the display to its original factory setting.
To perform a factory reset
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the Factory Reset submenu.
4. Select Yes or No as desired and confirm.
3.17 Touchscreen
About touchscreen
This is only applicable for: MDRC-2324 (option STIB, HTIB and HTEW).
• Touchscreen is interfacing via USB.
• Windows 7, 8 and 10: automatic installation of driver.
• Windows XP: requires a manual installation of a WinXP driver and is only supporting a single touch
behavior.
• No calibration is required.
Operation