R5900049 /13 ClickShare CSE-800100
6.29 Buttons, External access point
Overview
The selection of a security mode for the connection between the Buttons and the corporate access points can
be done in the ClickShare Configurator. When configuring the Buttons to connect to an ‘External Access Point’
, the authentication mode can be selected:
• Security mode EAP-TLS, see “Buttons, External access point, mode EAP-TLS”, page 100.
• Security mode EAP-TTLS, “Buttons, External access point, mode EAP-TTLS”, page 101.
• Security mode PEAP, “Buttons, External access point, mode PEAP”, page 102.
• Security mode WPA2-PSK, “Buttons, External access point, mode WPA2-PSK”, page 103.
6.30 Buttons, External access point, mode EAP-
TLS
How to fill out
1. Fill out a Corporate SSID.
Image 6–50 Buttons, External access point, mode EAP-TLS
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
2. Fill out the Domain and Identity.
3. Select the certification method. Click on the drop down box and select the desired method.
• Manually provide Client & CA certificates
• Auto enrollment via SCEP
Manually providing certificates
1. Upload client certificate. Click on Choose file and browse to the desired file.
CSE-800 Configurator
To Next Page
Loading...
