Barco SIM 7D - Fixing the Lens Clamp Assembly to the Projector Lens

3. Mounting the rugged frame
Image 3-5
Note: Make sure that the projector’s feet holes are aligned with axis of rugged frame holes
3. U se 3 screws A5760 85 and 3 washers A5775
29 to fix the projector to the bottom frame
3.4 Fixing the lens clamp assembly to the projector lens
Necessary tools
• Allenkey3mm
• Allenkey4mm
• Nut spanner 7 mm
How to fix t he lens clamp asse mbly to the projector lens?
1. Slide the lens clamp assem bly R864195 over the lens and tighten around the lens using two screws
14
R59770377 RUGGED FRAME 07/04/2009