Barco SIM 7D - Position of the Tightening Screws of the Lens Clamps; Fix the Lens Clamp to the Lens; Fixing the Lens Clamp Assembly

3. Mounting the rugged frame
Image 3-6
Position of the tightening screws of the lens clamps
Image 3-7
Fix the lens clamp to the lens
2. Fix the lens c lamp assembly (vertical position) to the front frame using 3 screws B362189, 3 wa shers V3673807 and 3 T-nuts
B362188 but do not tighten the screws
Image 3-8
Fixing the lens clamp assembly
3. Adjust the lens if necessary
R59770377 RUGGED FRAME 07/04/2009
15