Barco UDM 4K22 - 8.9 Configuring the lens, Shift to center

R5911443 /11 UDM96
Image 8–19 Example of the Lens menu
2. In the Lens menu, click Dynamic focus to toggle between On and Off.
Image 8–20 Lens menu, Dynamic focus enabled Image 8–21 Lens menu, Dynamic focus disabled
Note: The Dynamic focus slider is only visible when the light source is on.
8.9 Configuring the lens, Shift to center
What can be done?
The lens can be forced back to the center position by selecting Shift to center.
How force lens in Mid position
1. To force lens in Mid position, select Installation → Lens → Shift to center.
Image 8–22 Lens menu, Shift to center
2. Confirm by pressing the CONFIRM button.
GUI – Installation