Bard MC5300 User Manual

Manual 2100-746D
Page 17 of 59
Humidification Interstage Differential
Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Humidication
ISD.
4. Press UP/DOWN arrow to scroll to Humidication
ISD Set Point Value.
5. Press Conrm button.
6. Press Home button.
Humidification Stage Off Differential
Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Hum Stage Off
Differential.
4. Press UP/DOWN arrow to scroll to Hum Stage Off
Differential Set Point Value.
5. Press Conrm button.
6. Press Home button.
High Humidity Alarm Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High Humidity
Alarm Set Point.
4. Press UP/DOWN arrow to scroll to High Humidity
Alarm Set Point Value.
5. Press Conrm button.
6. Press Home button.
Low Humidity Alarm Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Low Humidity
Alarm Set Point.
4. Press UP/DOWN arrow to scroll to Low Humidity
Alarm Set Point Value.
5. Press Conrm button.
6. Press Home button.
Low Temperature Alarm Level Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Low Temperature
Alarm Level.
4. Press UP/DOWN arrow to scroll to Low Temperature
Alarm Level Set Point Value.
5. Press Conrm button.
6. Press Home button.
High Temperature Alarm Level 1 Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level 1.
4. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level Set Point Value.
5. Press Conrm button.
6. Press Home button.
High Temperature Alarm Level 2 Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level 2.
4. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level Set Point Value.
5. Press Conrm button.
6. Press Home button.
Heat Pump Lockout Range Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Heat Pump
Lockout Range.
4. Press UP/DOWN buttons to scroll to Heat Pump
Lockout Range Set Point Value.
5. Press Conrm button.
6. Press Home button.

Bard MC5300 Specifications

General

Brand	Bard
Model	MC5300
Category	Controller
Language	English