Barkey S-line - Electromagnetic Properties; Safe Clearances; Electromagnetic Emission

Safety information
14 Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Telephone: +49(0)5202-9801-0
Service department: +49(0)5202-9801-30 Fax: +49(0)5202-9801-99 - email: info@barkey.de
Instructions for Use
Barkey S-line
3.4 Electromagnetic properties / safe clearances
3.4.1 Electromagnetic emission
Guidelines and manufacturer's declaration - emitted electromagnetic interference
The Barkey S-line is intended for use in the electromagnetic environment shown below. The
customer or the operator of the Barkey S-line should ensure that it is used in this type of envi-
ronment.
Measuring emitted interference Conformity
Electromagnetic environment -
guideline
HF emissions in accordance with
CISPR 11
Group 1
The Barkey S-line uses HF energy
exclusively for its inner function.
This is why its HF emission is very
low, and it is unlikely that neigh-
bouring electronic devices will be
disturbed.
HF emissions in accordance with
CISPR 11
Class A
Emissions of harmonics in accor-
dance with IEC 61000-3-2
Class A
Emissions of voltage fluctua-
tions/flickering in accordance with
IEC 61000-3-3
Conforms
The Barkey S-line is suitable for
use in facilities other than residen-
tial installations and those that are
connected to a public supply net-
work that also supplies buildings
that are used for residential pur-
poses.