BARKO LOADERS 295 - General Torque Specifications

page 25
295 AC
800-00158
1/4 9 10 5 6
5/16 17 20 10 12
3/8 31 35 19 21
7/16 50 55 30 33
1/2 75 85 45 51
9/16 110 120 66 72
5/8 150 170 90 100
3/4 265 300 160 180
7/8 400 435 240 260
1 600 650 360 390
1-1/8 800 900 480 540
1-1/4 1120 1240 670 745
1-3/8 1470 1670 880 1000
1-1/2 1950 2200 1170 1320
1/4 17 19 10 12
5/16 34 37 20 22
3/8 60 68 36 41
7/16 96 108 58 65
1/2 145 165 87 100
9/16 210 235 125 140
5/8 290 330 175 200
3/4 515 575 310 345
7/8 830 980 500 590
1 1250 1350 750 810
1-1/8 1750 1950 1050 1170
1-1/4 2500 2750 1500 1650
1-3/8 3250 3700 1950 2220
1-1/2 4350 4850 2600 2900
1/4 12 14 7 9
5/16 25 27 15 17
3/8 44 49 26 30
7/16 70 78 42 47
1/2 107 120 64 72
9/16 154 171 92 102
5/8 212 240 127 144
3/4 376 420 226 252
7/8 606 668 364 400
1 909 995 545 597
1-1/8 1288 1444 773 866
1-1/4 1817 2012 1090 1207
1-3/8 2382 2712 1430 1627
1-1/2 3161 3557 1897 2134
GRADE 8
SAE GRADE 8
RECOMMENDED
TORQUE FOOT
POUNDS
*
GRADE 5
SAE GRADE 5
RECOMMENDED
TORQUE FOOT
POUNDS
*
*
GRADE 9
(MIN. 8 RADIAL
MARKS ON
HEAD) GRADE 9
(BOW-MALLOY)
RECOMMENDED
TORQUE FOOT
POUNDS
*
GENERAL TORQUE SPECIFICATIONS
LUBRICATED
DRY
FINE
COARSE
FINECOARSE
DIA.
LUBRICATED
DRY
FINE
COARSE
FINECOARSE
LUBRICATED
DRY
FINE
COARSE
FINECOARSE
DIA.
DIA.
This is lubed torque.
Lubricate with anti-seize
compound part no. 514-
00700.
WARNING
Grade 9 bolts must be used
with Grade 9 washers.
WARNING
Do not re-use grade 8 or grade
9 bolts or nuts - replace with
new ones.
WARNING
Loose or overtorqued bolts can
cause death, severe injury, or
property damage. Maintain
proper bolt torque. Visually
check bolts daily. Check
torque every 50 hours.
See Special Torque Specifications that pertain specifically to this machine.