Barko 6025 User Manual

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

The information and illustrations in this manual have been approved as accurate at the

time of printing. However, the manual may contain information on options not present

on your loader. The right is reserved by Barko Specialty Equipment to make changes

and improvements in it's product at any time without notice or obligation.

Service ManualService Manual

Service ManualService Manual

Service Manual

Machine

Serial Number

082014

6025 Chipper6025 Chipper

6025 Chipper6025 Chipper

6025 Chipper

Table of Contents

Questions and Answers:

M
Mrs. Amy Turner DDSAug 4, 2025
What to do if the starter of my Barko Chipper will not turn the engine?
- R
  Rebecca RodriguezAug 4, 2025
  If the starter of your Barko Chipper won't turn the engine, there could be several reasons: * The engine might be locked, in which case you should free it up. * The starter itself could be damaged, requiring replacement. * There may be damage to the wiring or solenoid, which would need inspection, repair, or replacement. Also, investigate and resolve any other potential issues that might be preventing the starter from operating.
M
Matthew MooreAug 13, 2025
What to do if my Barko Chipper battery does not hold its charge?
- L
  lisa71Aug 13, 2025
  If your Barko Chipper's battery isn't holding its charge, it might be because the battery connections are dirty or loose. Try cleaning or tightening the battery connections. If that doesn't work, the battery itself might be damaged and need to be replaced.

Barko 6025 Specifications

General

Brand	Barko
Model	6025
Category	Chipper
Language	English

Summary

Introduction, Safety, and Reference

Manual Overview and Contact Information

Introduces the manual, machine, and provides contact details.

Abbreviations, Symbols, and Warranty

Defines terms, symbols, and outlines product warranty coverage.

Machine Knowledge, Safety, and Fire Prevention

Covers understanding the machine, general safety, and fire prevention measures.

Maintenance Procedures and Specifications

Preventive Maintenance and Servicing

Guidelines for routine maintenance, safety during service, and new machine procedures.

Component Specifications and Fluids

Covers replacement parts, lubrication, fluid specifications, and torque values.

Hydraulic and Electrical Systems

Details on hydraulic pressure, fittings, and electrical system maintenance.

Power Unit, Troubleshooting, and Structural

IQAN System Diagnostics

Information on IQAN XA2/XS2 systems, blink codes, and failure modes.

Power Unit and General Troubleshooting

Covers engine maintenance, air cleaner servicing, and general machine troubleshooting.

Structural Maintenance and Decals

Information on structural maintenance and decal locations.