Bartec ALCAR TECH600 - Connecting to the Bluetooth; Obdii Module

TECH600 User Guide 2020
24 | P a g e
CONNECTING TO THE BLUETOOTH OBDII MODULE
Step 1:
To connect the TECH600 to the Bluetooth (BT) OBDII module, select Connections in the
Settings menu.
Step 2:
Turn the BT OBDll Module on by simply plugging it to the OBDII interface of any passenger
vehicle. ATTENTION: It is necessary to plug the BT OBDll Module to a vehicle. Connecting it
to a USB-cable will turn it on but you will not be able to connect the BT OBDll Module to the
tool.
Step 3:
Once the TECH600 has discovered the BT OBDII module, it will display a list of all possible
connections. From this list, select the item which begins with ‘OBD’ and ends with the BT
OBDII module’s serial number; ie: ‘OBD 5100010001’. The BT OBDII module’s serial number
can be confirmed by checking the label affixed to the module.
Step 4:
Press enter to confirm and pair the TECH600 with the BT OBDII Module. A confirmation
message will be displayed when the connection is successful.
To disconnect the TECH600 from the BT OBDII Module, go to Settings > Connections >
OBDII Module, and press enter to disable the connection.