CONNECTION SCHEME
27
Connection by a Uninterruptible Power Supply (UPS).
For connecting high power electric locks you must use an additional power
supply. The BA- 04 and BA-08 connection diagram from the uninterruptible
power supply, with an electromechanical or electromagnetic lock is presented
below:
Attention:
1. The lock opening time is set by
djusting the resistor on the
uninterruptible power supply board
UPS – DP/P.
2. The type of lock: electromechanical
or electromagnetic is set by the switch
on the uninterruptible power supply
board UPS – DP/P.
Uninterruptible power supply UPS – DP/P.
Network switch
BLACK
RED
YELLOW
“EXIT“ CONTACT 1
“EXIT“ CONTACT 2
“EXIT“ BUTTON
LOCK
V
V
V
To Next Page
Loading...
