22 • Important: Always read and follow operating instructions.
Tube Type Tires
Mounting
1. Avoid pinching or forcing the tube.
2. Apply rubber lubricant to the tire beads of the tire.
3. Mount the bottom tire bead.
4. Round out the tube with a small amount of air.
5. Apply rubber lubricant to the tube.
6. Insert the tube into the tire.
7. Mount the top tire bead.
Demounting
1. After tire beads are loosened, lubricate the beads
and rim liberally.
2. Position Duckhead
®
mount/demount tool and
bead lifting tool as described in steps 7 through 10 on
pages 9 and 10. Depress table top pedal and rotate
only a short distance at a time. This allows you to stop
the process should the tube get pinched.
3. After upper tire bead is demounted, remove tube
and demount lower tire bead.
To Next Page
Loading...