BASIC DC Solareg II - SOLAREG II Specifications; Electrical Specifications

15
10 SOLAREG II Specications
Housing
Material
100% recyclable ABS housing for wall mount-
ing
Dimensions L x W x D in mm,
weight
175 x 134 x 56; approx. 360 g
Protection class IP20 according to DIN 40050
Electrical specications
Operating voltage DC 12 volts
Max. module voltage. DC 23 volts
Max. module current. 2A
Potential-free switching contact 12V DC / max. 2A
Radio interference level N according to VDE 0875
Max. cable cross-section
230V connections
2.5 mm² ne-wire/single wire
Temperature sensor /
measuring range
PT1000, 1 kΩ at 0°C
-30°C .. +250°C
Output - voltage
Power - switching output
12V DC
max. 1A
Power consumption (stand by) 0,3W
Fuse protection
Fine-wire fuse 5 x 20mm, 4A/T
(4 amperes, delayed-action fuse)
Miscellaneous
Operating temperature 0 – 50°C
Storage temperature -10 – +65°C
Humidity max. 60 %
11 Resistance table PT1000
The temperature sensors can be checked for proper function using the following
temperature resistance table and an ohmmeter:
Temperature
in °C
Resistance
in Ohm
Temperature
in °C
Resistance
in Ohm
-30 882 60 1232
-20 921 70 1271
-10 960 80 1309
0 1000 90 1347
10 1039 100 1385
20 1077 120 1461
30 1116 140 1535
40 1155 200 1758
50 1194
Subject to change in
accordance with technical
advances!