Basler DGC-2020ES - Page 19

9469200995 2-7
DGC-2020ES Configuration through the Front Panel
○ 1 PHASE O-RIDE
■ INPUT
■ RECOGNITION (Visible when an INPUT is selected.)
○ BATT CHRG FAIL
■ INPUT
■ ALARM CONFIG (Visible when an INPUT is selected.)
■ ACTIVATN DLY (Visible when an INPUT is selected.)
■ RECOGNITION (Visible when an INPUT is selected.)
○ LOW COOL LEVEL
■ INPUT
■ ALARM CONFIG (Visible when an INPUT is selected.)
■ ACTIVATN DLY (Visible when an INPUT is selected.)
■ RECOGNITION (Visible when an INPUT is selected.)
○ LOW FUEL LEVEL
■ INPUT
■ ALARM CONFIG (Visible when an INPUT is selected.)
■ ACTIVATN DLY (Visible when an INPUT is selected.)
■ RECOGNITION (Visible when an INPUT is selected.)
○ FUEL LEAK DETECT
■ INPUT
■ ALARM CONFIG (Visible when an INPUT is selected.)
■ ACTIVATN DLY (Visible when an INPUT is selected.)
■ RECOGNITION (Visible when an INPUT is selected.)
PROGRAMMABLE OUTPUTS
● CONFIG ELEMENTS
○ CONFIG ELEMENT X (X = 1 to 8)
■ ALARM CONFIG
■ ACTIVATN DLY
■ RECOGNITION
ALARM CONFIGURATION
● HORN CONFIGURATION
○ HORN
○ NOT IN AUTO HORN
● PRE-ALARMS
○ HIGH COOLANT TEMP
■ ENABLE
■ THRESHOLD
○ LOW COOLANT TEMP
■ ENABLE
■ THRESHOLD
○ LOW OIL PRESSURE
■ ENABLE
■ THRESHOLD
○ LOW FUEL LEVEL
■ ENABLE
■ THRESHOLD
■ HYSTERESIS
○ ENGINE OVERLOAD
■ ENG KW OVRLD-1
■ ENG KW OVRLD-2
■ ENG KW OVRLD-3
○ MAINTENANCE INTERVAL
■ ENABLE
■ THRESHOLD
○ BATTERY OVERVOLTAGE
■ ENABLE
■ THRESHOLD
○ LOW BATTERY VOLTAGE
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY