9469200995 4-13
DGC-2020ES Communication
assigned to the programmable function is closed, whether the function is configured as None, Alarm, or
Pre-alarm.
† This LED can be reprogrammed in the DGC-2020ES to suit the needs of a particular application. The
condition listed above is annunciated by default.
Additionally, the Remote Display Panel indicates when the DGC-2020ES is not operating in Auto mode
and when the generator is supplying load or when the DGC-2020ES is in an alarm state not listed above.
Refer to Basler Publication 9318100990 for more information on the Remote Display Panel.
See the Terminals and Connectors chapter in the Installation manual for more information on connecting
the Remote Display Panel to the DGC-2020ES.
To Next Page
Loading...
