To Next Page
J
Jesse StantonAug 12, 2025
What to do if the voltage is high and uncontrollable with the voltage adjust rheostat on my Basler Controller?
- JJames WillisAug 12, 2025
If the voltage of your Basler Controller is high and uncontrollable even when using the voltage adjust rheostat, try the following: First, repair any damaged wiring. Then, ensure the system is set to AUTO. If the issue persists, replace the Voltage Adjust Potentiometer or the relay. Reconnect to the proper tap. If none of these steps work, it may be necessary to replace or repair the voltage regulator.
General
