Basler SR4A User Manual

3-5
Figure 3-4. Brush Type Rotary Exciter Interconnection.
(2) When the generator output voltage is different than the preceding values and exceed the values
specified in Table 1-2, a power transformer must be used to match the generator voltage to the
regulator input. If excessive voltage is applied to the regulator input (terminals 3 and 4), the regulator
may be damaged.
CAUTION
Without the use of this transformer, a ground at any point in the field
circuit and another ground in the generator output, could result in
failure of the regulator.

Basler SR4A Specifications

General

Brand	Basler
Model	SR4A
Category	Controller
Language	English