5-5
a. Basler SR4A and SR8A are warranted against defective material and workmanship for 18 months
from the date of shipment from our factory. Units submitted for warranty repair should be returned to
the factory in Highland, Illinois, freight prepaid, with complete description of the installation (See
Attachment A) and the reported troubles. Pre-arrangement with either the nearest Basler Sales
Office or the Factory will assure the fastest possible turn around time.
b. Out-of-warranty units should also be returned, freight prepaid, to the factory in Highland, Illinois.
Repairs to regulators are made at a nominal charge, unless the unit is so extensively damaged that
complete replacement is required.
The more common generator system malfunctions and the appropriate repair procedure are listed in
Table 5-3.
5-4. WARRANTY AND REPAIR SERVICE
5-5. TROUBLESHOOTING
To Next Page
Loading...
