pag. 30
instruction manual
for use and maintenance serie MEC, STAR, AGRI
Battioni Pagani
®
INTRODUCTION
The Rotary blades vacuum pumps Battioni Pagani
®
have been designed and constructed in compliance with EEC safety regulations
and have been assessed for risks according to standard UNI EN ISO 12100:2010; in particular they are in conformity with directive
2006/42/CE and subsequent modications and additions.
Since the design of this pump complies with the denition of a machine as contained in the Machinery Directive 2006/42/EC, the
pump bears the CE mark on its identication plate. However, it must be pointed out that because of its application and the purpose
for which it is supplied, which species that it be installed by the buyer (without motive power), Battioni Pagani® refuses any and
all responsibility if the instructions in this operation and maintenance manual are not followed.
This manual contains the Declaration of CE conformity and all the instructions required by users, and by the manufacturers of plant
systems, for using our products safely. As a result, the manual must always be kept near the rotary blades vacuum pump.
The descriptions and illustrations in this manual are purely indicative.
The manufacturer reserves the right to make any type of change to this manual at any time.
GUARANTEE
At the moment of receiving the Rotary blades vacuum pump check that it is complete with all its parts.
Any anomalies or missing parts must be notied within 8 days of receipt of the product.
The Supplier guarantees that the product sold is free from defects and undertakes to repair or, by nal decision, to replace the faulty
parts only if the defects are clearly attributed to the manufacturing process or to the materials used. In any case the costs of labour,
travel and transport, and any customs expenses shall be paid by the Purchaser. The vendor is not obliged to pay damages except in
the case of fraud or grave offence. All parts subject to normal wear are excluded from the guarantee. The guarantee will cease to be
valid if:
• the faults reported are the result of accidents or obvious carelessness or negligence on the part of the Purchaser,
• the parts have been modied, repaired or tted by persons not authorised by the vendor,
• the failures and breakages have been caused by use that is unsuitable or heavier than that provided for by the vendor,
• the Purchaser has failed to make the payments as agreed by contract.
The Purchaser loses his/her right to the guarantee if he/she fails to report the defects to the vendor within 8 days of discovery,
making an exception to article 1512 of the Italian Civil Code. The Vendor reserves the right to make changes or improvements to
his/her products without being obliged to make the same changes or improvements to the units already produced and/or delivered
previously. The Vendor is not responsible for accidents or for the effects of accidents to people or property due to defective materials
and/or workmanship.
Thank you for choosing Battioni Pagani
®
.
This danger symbol in the manual means that important safety instructions are given. This information is
destined primarily for the operator whose responsibility it is not only to comply with them personally, but also
to ensure compliance by other persons exposed to the connected risks.
To Next Page
General
