battioni Pagani WPT Series User Manual

WPT, KTS, KPS,
KTM, WSM
WPT, KTS, KPS, KTM, WSM
Litograa Reverberi - Pr
Rev. 03 del 03.02.2017
IT
GB
MANUALE ISTRUZIONI
PER L’USO E LA MANUTENZIONE
INSTRUCTION MANUAL FOR
USE AND MAINTENANCE
NOTICE D’EMPLOI
ET D’ENTRETIEN
GEBRAUCHS-UND
WARTUNGSANLEITUNGEN
HANDLEIDING VOOR HET
GEBRUIK EN HET ONDERHOUD
FR
DE
NL
Rotary vanes
vacuum pump
Centrifugal pump
Rotary postive displacement
lobes pump
Rotary postive displacement
lobes pump
Rotary lobes
vacuum pump
Via Cav. Enzo Ferrari, 2
43058 Ramoscello di Sorbolo (PR) - Italy
Ph. +39 0521 663203
Fax +39 0521 663206
www.bapag.it
info@bapag.it

battioni Pagani WPT Series Specifications

General

Brand	battioni Pagani
Model	WPT Series
Category	Water Pump
Language	English

Summary

Introduction, Warranty, and Safety Information

Manual Overview and Warranty Terms

Details the manual's purpose, safety emphasis, and warranty conditions, exclusions, and termination procedures.

Safety Symbols and Danger Awareness

Explains mandatory safety signs and lists potential dangers arising from non-compliance with operating instructions.

General Information on Pump Versions

Rotary Blades Vacuum Pump Versions

Details available pump versions (M, P, D, H, G, K, KA) and their respective power take-off methods.

Identification Label Information

Describes the data found on the pump's identification label, including model, serial number, and specifications.

Use and Maintenance Instructions

Packaging, Storage, Handling, and Transport

Provides procedures for safe packaging, storage, handling, and transport of the vacuum pumps.

Assembly, Fitting, and Installation

Outlines steps for assembling and mounting the pump, including version-specific connections and slopes.

Belt Tensioning and Installation Notes

Guidance on belt tension, calculation, and specific installation notes for various pump series.

Cooling and Hydraulic System Details

Cooling System General Information

Overview of cooling systems, flow rates, and maximum temperatures for KTS/KPS and KTM/WSM models.

Cooling Circuit Operations and Diagrams

Instructions for filling cooling circuits, air venting, and diagrams of radiator/fan systems.

Hydraulic System Specifications and Maintenance

Technical specifications, schematics for H version, and motor use/maintenance instructions.

Hydraulic System Maintenance and Troubleshooting

Guidelines for hydraulic system maintenance, fluids, startup, and problem-solving.

Technical Procedures: Disassembly and Re-fitting

Technical Specifications and Uninstallation

Table of technical characteristics and procedures for uninstalling various pump versions.

Disassembly Procedures (Back Part)

Step-by-step guide for disassembling the back part of WPT, KTS, KTM, WSM, and KPS series pumps.

Front Part Disassembly and Re-fitting

Instructions for disassembling and re-fitting the front part of various pump versions.

Back Part Disassembly Procedures

Detailed steps for disassembling the back part of WPT, KPS, KTM, and WSM series pumps.

Manifold Re-fitting Procedures

Procedures for refitting the manifold for WPT, KTS, KPS, and KTM/WSM series pumps.

Operation, Lubrication, and Troubleshooting

Startup, Operation, and Control Devices

Procedures for starting, operating, stopping, and using control devices, including rotation direction.

Lubrication System and Oil Management

Introduction to automatic lubrication, oil types, oil tank capacity, and oil usage recommendations.

Lubricating Oil Quantity and Adjustment

Details on oil quantity per model and procedures for adjusting oil delivery in automatic lubrication.

Overpressure and Vacuum Valves

Description of valve availability for different models and their functions.

Testing and Running-In Procedures

Guidelines for pump testing, running-in period, and optimal operating parameters.

Pump Start, Operation, and Stop

Steps for starting, operating, and stopping the pump, including parameters and noise levels.

Troubleshooting Common Issues

A guide to diagnose and resolve issues like low vacuum, overheating, lubrication, and rotation problems.

Maintenance, Servicing, and Support

Maintenance and Cleaning Procedures

General maintenance advice, body washing, flushing kit usage, and oil tank/valve cleaning instructions.

Valve Checking and Blade Generalities

Procedures for checking valves and general information on pump blades, wear, and breakage causes.

Blade Inspection Methods

Detailed procedures for inspecting blade wear on WPT, KTS, M, MA, KPS, KTM, and WSM series pumps.

Blade Replacement and Dimensions

Steps for replacing blades, their dimensions, and rubber ball replacement procedures.

Gear Replacement and Technical Support

Procedures for replacing gears, contacting technical support, and regular servicing tasks.

End-of-Life Procedures

Putting Out of Service and Demolition

Guidelines for safely decommissioning and disposing of the vacuum pump and its components.