EasyManua.ls Logo

battioni Pagani GARDA User Manual

battioni Pagani GARDA
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GARDA / LEDRA
Litograa Reverberi - Pr
Rev. 5 del 01.12.2015
Rotary vanes
vacuum pump
Centrifugal pump
Rotary postive displacement
lobes pump
Rotary postive displacement
lobes pump
Rotary lobes
vacuum pump
Via Cav. Enzo Ferrari, 2
43058 Ramoscello di Sorbolo (PR) - Italy
Ph. +39 0521 663203
Fax +39 0521 663206
www.bapag.it
info@bapag.it
MANUALE ISTRUZIONI
PER L’USO E LA MANUTENZIONE
INSTRUCTION MANUAL FOR
USE AND MAINTENANCE
NOTICE D’EMPLOI
ET D’ENTRETIEN
GEBRAUCHS-UND
WARTUNGSANLEITUNGEN
MANUAL DE INSTRUCCIONES
DE USO Y MANTENIMIENTO
IT
GB
FR
DE
ES
Question and Answer IconNeed help?

Do you have a question about the battioni Pagani GARDA and is the answer not in the manual?

battioni Pagani GARDA Specifications

General IconGeneral
Brandbattioni Pagani
ModelGARDA
CategoryWater Pump
LanguageEnglish

Summary

INTRODUCTION

WARRANTY CONDITIONS

Details the terms, limitations, and conditions under which the product warranty is valid.

COMPULSORY SAFETY SIGNS

Moving Parts and Hand Safety

Warnings for moving parts and the necessity of hand protection.

Manual Reading and Maintenance Procedures

Instructions to read the manual and perform maintenance tasks.

Handle Operation and PPE Guidance

Guidance on handle rotation and required personal protective equipment.

CONDITIONS AND LIMITS OF USE

GENERAL INFORMATION

GARDA Group Description

Describes the composition and function of the GARDA combined group.

LEDRA Group Description

Describes the composition, function, and enhancements of the LEDRA combined group.

VERSIONS OF THE COMBINED GROUP

IDENTIFICATION LABEL

Identification Label Data

Lists the specific data points found on the machine's identification plate.

PACKAGING, STORAGE, HANDLING AND TRANSPORTATION

Packaging Options

Outlines available packaging methods for individual or bulk shipment.

Storage Guidelines

Provides recommendations for storing the equipment to ensure its integrity.

Handling and Transport Instructions

Details safe methods for lifting, moving, and transporting the combined groups.

ASSEMBLY, FITTING, INSTALLATION AND DISASSEMBLY

Assembly and Installation Procedure

Step-by-step instructions for correctly assembling and installing the GARDA or LEDRA groups.

Hydraulic Centrifuge Diagram

Installation Diagram

Uninstallation Procedure

START-UP, SETTING UP, TESTING AND RUNNING

Direction of Rotation Check

Ensures the PTO shaft rotation matches the equipment's requirements.

Recommended Lubrication Oil

Specifies the type of oil and maintenance schedule for the gearbox.

TESTING THE GROUP

RUNNING THE GROUP

START, OPERATION AND STOP

Starting the Group

Steps to safely start the GARDA/LEDRA combined group.

Operating Specific Models

Guidelines for operating specific models like GARDA 3500, 6500, and LEDRA 6500.

Emptying with Centrifugal Pump

Emptying with Aspirator/Compressor

OPERATING PARAMETERS

Vacuum Pump Operating Parameters

Operating parameters for the rotary blades vacuum pump.

Centrifugal Pump Operating Parameters

Operating pressure and time limits for the centrifugal pump.

Control Devices

Required Personal Protective Equipment

Stopping the Group

Troubleshooting Guide

MAINTENANCE, INSPECTIONS, CHECKS AND REPAIRS

Gearbox Washing Procedure

Procedure for cleaning the gearbox annually.

Central Gear Wheel Replacement

Steps for replacing the central gear wheel in the gearbox.

Central Splined Shaft Replacement

Procedure for replacing the central splined shaft of the gearbox.

Mechanical Seal Replacement

Centrifugal Pump Shaft Replacement

Impeller Replacement

Screw Nut Replacement

Screw Nut Support Replacement

Periodic Maintenance Schedule

Decommissioning and Demolition

Declaration of Incorporation

Related product manuals