Page 8 For technical questions, please call 1-888-866-5797. Item 64290
Specifications
Electrical Rating 120 VAC / 60 Hz / 6.5 A
Cutting Speed 0-3000 SPM
Stroke Length 5/8"
Baseplate Tilt 0 – 45° left or right
Blade Type
T-shank Blades
(sold separately)
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: 1 mW,
Wavelength: 650 nm
CLASS IIa LASER PRODUCT
This product complies
with 21 CFR 1040.10
and 1040.11
Distributed by
Harbor Freight Tools
3491 Mission Oaks Blvd.
Camarillo, CA 93011
64290
Manufacture Date:
, �������
AVOID EXPOSURE
Laser light is emitted
from this opening.
CAUTION! Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
CAUTION! The use of optical instruments
with this product will increase eye hazard.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page 14.
Functions
Laser Opening
Figure 1
Dust Port (66)
Trigger (34)
Cutting Mode Lever (23)
Lock ON Button
Baseplate (63)
Transparent Guard (1)
Power ON Light (46)
Dust Blower Switch (53)
Laser ON/OFF Button (27)
Speed Dial (32)
Blade Clamp Assembly (7)
Fence Lock Knobs (60)
SAFETY OPERATION MAINTENANCESETUP
To Next Page
Loading...
