Bauer 1974E-B - Specifications; Setup - Before Use; Mounting; Assembly

Page 8 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ Item 57151
HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM
H,$91719)#1"<+
Electrical Rating 120 VAC / 60 Hz / 15 A
Rated No Load Speed 4100 RPM
Cutting Capacity at 45° 3-7/8" x 10-1/4"
Cutting Capacity at 90° L/R 3-7/8" x 14-1/2"
Maximum Bevel 48° Left and Right
Maximum Miter 52° Left – 60° Right
Saw Blade
12" Diameter,
1" Round Arbor
4100 Minimum RPM Rating
H$#2,&B&'$7"-$&R+$%
&N$)*&#5$&;!JON;&OPMLNJI!J&HI>;JK&O!>LNPIJOL!&+$9#1"<&)#&#5$&4$81<<1<8&"7&#51+&
:)<2)(&1<9(2*1<8&)((&#$Z#&2<*$-&+245$)*1<8+&#5$-$1<&4$7"-$&+$#&2,&"-&2+$&"7&#51+&,-"*29#/
!"#$% For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 22.
P"2<#1<8
1. Use the four bolt holes provided in the Base
to mount the Miter Saw to a stable support
before use. Mounting hardware not included.
2. Ensure that the Miter Saw is always stable
and secure (e.g. fixed to a bench).
I++$:4(.
1. Slide the Dust Collection Bag over the Dust Outlet at
the rear of the Saw Head Assembly.
2. Install the Right Sliding Fence:
a. Loosen the Fence Lock Knob
counter-clockwise.
b. Insert the Right Sliding Fence into the slot
and slide the Fence to the desired position.
c. Tighten the Fence Lock Knob.
V2+#&
')8
V2+#&
L2#($#
>182-$&I&
>$<9$&&
U"9X&Y<"4
N185#&H(1*1<8&
>$<9$
>182-$&'&