EN-8
b) Ensure that the hedge trimmer is correctly located in a
designated working position before starting the engine.
c) While operating the hedge trimmer, always ensure that the
operating position is safe and secure, especially when using
steps or a ladder.
d) Do not operate the hedge trimmer with a damaged or
excessively worn cutting device.
e) To reduce re hazards, keep the engine and silencer free of
debris, leaves and excessive lubricant.
f) Always ensure that all handles and guards are tted when
using the hedge trimmer. Never attempt to use an incomplete
hedge trimmer or one tted with an unauthorized modication.
g) Always use two hands to operate a hedge trimmer tted with
two handles.
h) Always be aware of your surroundings and stay alert for
possible hazards of which you may not be aware due to the
noise of the hedge trimmer.
Maintenance and storage
a) When the hedge trimmer is stopped for servicing, inspection or
storage, shut off the power source, disconnect the spark plug
wire from the spark plug and make sure all moving parts have
come to a stop. Allow the hedge trimmer to cool before making
any inspections, adjustments, etc.
b) Store the hedge trimmer where the fuel vapour will not reach
an open ame or spark. Always allow the hedge trimmer to cool
down before storing.
c) When transporting or storing the hedge trimmer, always t the
cutting device transport guard.
SAFETY WARNINGS FOR POLE HEDGE TRIM-
MER
1. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the pole hedge trimmer
To Next Page
Loading...