Need help?Do you have a question about the BAUKER SBC30 and is the answer not in the manual?
General| Brand | BAUKER |
|---|---|
| Model | SBC30 |
| Category | Brush Cutter |
| Language | English |
Instructions to keep children, animals, and bystanders away from the work area.
Guidelines for wearing suitable safety equipment.
Recommendations for wearing protective clothing to reduce injury risk.
Advice on storing the machine in a dry, high, or locked place.
Ensuring the tool is not damaged before operation.
Prohibits operation when impaired by fatigue, illness, or substances.
Ensuring the air filter is clean for optimal engine performance.
Verifying correct adjustment and smooth operation of the throttle cable.
Using manufacturer's recommended replacement parts for safety.
Ensuring all guards are correctly fitted for safety.
Recommends professional servicing for safety and proper repair.
Warning against operating the cutter in wet conditions to prevent slipping.
Instruction to avoid operating the blade too close to the ground.
Action to take if excessive vibration occurs, indicating a potential issue.
Mandatory replacement of damaged cutting blades for safety.
Caution to stay clear of the cutting blade, which spins after engine stop.
Requirement to switch off the engine when not actively cutting.
Warning against operating the trimmer in wet conditions to prevent slipping.
Instruction to maintain safe distance from the cutting line.
Mandatory replacement of damaged cutting heads for safety.
Ensuring all guards and handles are correctly fitted for safety.
Caution to stay clear of cutting lines, which spin after engine stop.
Requirement to switch off the engine when not actively trimming.
Warning about potential serious injuries from the hedge trimmer.
Prohibition on children using the hedge trimmer.
Warning to be aware of and avoid overhead power lines.
Instruction to keep body parts clear of the cutter blade.
Guidance on safely carrying the pole hedge trimmer.
Warning to use only insulated grips due to electrical shock risk.
Pre-operation check for foreign objects in the hedge.
Recommendation to use both hands for safe operation.
Warning to maintain safe distance from overhead electrical power lines.
Recommendation for professional servicing by qualified dealers.
Ensuring the saw chain stops immediately when the trigger is released.
Prohibition on modifying the saw.
Instruction to keep handles clean and dry for grip.
Ensuring all caps and fasteners are securely tightened.
Requirement to use only recommended accessories and parts.
Prohibition of smoking during fuel handling or operation.
Instructions to eliminate ignition sources near fuel.
Guidelines for safe fuel mixing, storage, and container use.
Requirement to move away from fueling site before starting the engine.
Procedure for cooling the saw after use before storage.
Advice on safe storage of the unit and fuel.
Prohibits operation when impaired by fatigue, illness, or substances.
Instruction to keep bystanders at a safe distance during operation.
Warning about operating positions and falling branch hazards.
Emphasis on firm footing, balance, and using the provided harness.
Warning to maintain safe distance from overhead electrical power lines.
List of components specific to the brush cutter/grass trimmer.
List of components for the pole hedge trimmer attachment.
List of components for the pole chain saw attachment.
List of included tools.
General instruction to read the manual to reduce injury risk.
Indicates a warning of potential hazards.
Symbol indicating the need to wear ear protection.
Symbol indicating the need to wear eye protection.
Symbol indicating the need to wear a dust mask.
Symbol indicating the need to wear protective gloves.
Symbol indicating the need to wear protective footwear.
Symbol indicating the need to wear protective clothing.
Safety symbol for minimum distance to bystanders.
Warning symbol for thrown objects.
Warning symbol for blade thrust hazard.
Safety symbol to keep hands away from the blade.
Symbol indicating the need to wear head protection.
Symbol indicating the choke is in the open position.
Symbol indicating the choke is in the closed position.
Symbol for manual engine starter.
Symbol for chain oil filling or pump.
Symbol indicating a continuously variable function.
Prohibition of naked flames near flammable materials.
Prohibition of smoking near flammable materials.
Warning about hazardous exhaust fumes.
Specification for fuel mixture ratio and refueling procedure.
Warning symbol for hot surfaces.
Technical specifications related to the engine.
Technical specifications for the brush cutter function.
Technical specifications for the grass trimmer function.
Technical specifications for the pole hedge trimmer attachment.
Technical specifications for the pole chain saw attachment.
Accessory: Socket spanner for spark plug.
Accessory: Auxiliary handle.
Accessory: Harness.
Accessory: Blade for brush cutting.
Accessory: Pruner attachment.
Accessory: Grass trimmer attachment.
Accessory: Chain saw attachment.
Accessory: Safety guard.
Measured sound pressure level.
Measured sound power level.
Recommendation to wear ear protection.
Vibration data for the front handle.
Vibration data for the rear handle.
Uncertainty value for vibration measurements.
Warning about variability of vibration emission during actual use.
Warning about the risk of hand-arm vibration syndrome.
Details on the intended applications of the multi-tool.
Instructions and preparations before starting operation.
Steps for assembling the cutting or trimming guard.
Instructions for assembling and disassembling the grass trimmer.
Important notes regarding trimmer spool replacement.
Steps for assembling the pole hedge trimmer shaft.
Instructions for adjusting the pole hedge trimmer shaft.
Instructions for lubricating the chain.
Steps for assembling the auxiliary handle.
Instructions for assembling and disassembling shafts.
Steps for attaching the harness.
Detailed steps for starting the engine.
Instructions for safely stopping the machine.
General guidelines for operating the product.
Critical safety warnings for brush cutter operation.
Specifies usage and thickness limits for the brush cutter blade.
Safety instruction regarding the operating height of the unit.
Technique for cutting dense undergrowth.
Technique for cutting young trees or grass.
Instruction to remove the line cutter protector before use.
Specifies usage for the grass trimmer head and guard.
Safety instruction to maintain distance from the body.
Guidance on maintaining correct posture during use.
Recommended angle for the trimmer head during operation.
Technique for moving the trimmer during operation.
Instruction to regularly clean the cutting means.
Advice for trimming very tall grass.
Instruction to remove the blade protection sheath before use.
Technique for trimming hedge sides from bottom upwards.
Technique for trimming the top edge of the hedge.
Advice on starting hedge shaping from a young stage.
Instruction to use a specific working angle for safe operation.
Warning against using the saw on a ladder or in unsafe positions.
Caution against making impulsive or unconsidered cuts.
Requirement for adult supervision of children with the equipment.
Technique for sawing off small branches.
Technique for sawing off larger branches.
Technique for sawing off large/long branches in parts.
Procedure for cleaning the air filter.
Procedure for replacing or adjusting the spark plug.
Guidance on resharpening the saw chain.
Instruction to clean the product before storage.
Guidance on ideal storage conditions.
Safety instruction to store out of children's reach.
Recommendation for using original packaging or cover for storage.
Safety step before transporting the product.
Instruction to attach guards for transport.
Guidance on how to carry the product during transportation.
Advice to protect the product during vehicle transport.
Instruction to secure the product during transport.
Guidance on proper disposal and recycling of waste products.
Instructions for disposing of hazardous waste materials.
Information about the product's shipping packaging.
Troubleshooting steps for engine starting issues.
Troubleshooting steps for low power or speed issues.
Troubleshooting for cutting-line head problems.
Troubleshooting steps for engine idling issues.
Troubleshooting steps for excessive exhaust smoke.
Troubleshooting steps for excessive vibration.
Safety instruction before performing maintenance.
Statement on the tool's maintenance requirements.
Information on user-serviceable parts.
Instruction on cleaning the power tool.
Action required for a damaged supply cord.
Guidance on proper disposal of waste electrical products.
Clarification of the product's intended use.
Details of the product's guarantee period.
Statement declaring product conformity.
List of directives the product complies with.
Information about the involved notified body.
List of standards the product conforms to.
Identification of the person responsible for the technical file.
To Next Page