EN-30
NOISE DATA
A weighted sound pressure L
pA
= 95 dB(A)
A weighted sound power L
wA
= 115 dB(A)
K
wA
= 3 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration, front handle: a
h
= 7.6 m/s² ; rear handle:a
h
= 5.9 m/s²
Uncertainty K = 1.5 m/s²
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not
adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual
conditions of use should also take account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running idle but not actually doing
the job. This may signicantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
To Next Page
Loading...