11
Control panel layout
1) ON/OFF button
2) Safety lock button
3) Timer button
4) Plus button
5) Minus button
6) Cooking zone selection buttons (x 4)
7) Cooking zone indicators (x 4)
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
“Cleaning and maintenance” section).
o You should switch on one cooking zone at a time for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off. Otherwise the induction zone will
not operate.
To Next Page
Loading...
