Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves and accessories.
o Using a screwdriver, remove the lamp cover (1).
o Unscrew the bulb (2) in a clockwise direction and remove it from
its holder.
o Replace the bulb with a 25 W/300°C, screw type pygmy.
o Do not use any other type of bulb.
o Place the lamp cover back into its original position. There is a
curve on one side of the cover; this should be on the right hand
side as the cover goes back into place.
To Next Page
Loading...
