15
Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o You should use a suitable screwdriver to loosen the screws
holding the panel into place. Once this is removed, you will have
access to the bulb.
o Prior to touching the light bulbs ensure that they have cooled
down.
o Unscrew the light bulb and insert a new olive shaped bulb with
an E14 coupling 40W (max).
o IMPORTANT: Defective bulbs should be replaced immediately.
o If the lights still do not work, make sure that the bulb is fitted
properly into the housing before you call for technical assistance.
To Next Page
Loading...
