20
o Select a flat surface for assembling the cooker hood. Cover that
surface with a protective covering and place all cooker hood
parts and fittings on it.
o Do not tile, grout or silicone this appliance to the wall or
cabinetry. This appliance is designed to be surface mounted
only.
Installing your cooker hood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE
IT IN EXTRACTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGES 26-27 NOW TO
UNDERSTAND THE DIFFERENCES BETWEEN THESE
TWO MODES.
o We recommend that at least two people install this hood.
o Your cooker hood should only be fitted to a wall and secured
between two cupboards.
o It must be positioned at least 700
mm above the hob underneath it.
This measurement should be taken
from the highest point on the hob,
including the burners.
IMPORTANT: YOUR COOKER HOOD
SHOULD BE CONNECTED TO YOUR
MAINS SUPPLY AFTER THE REST OF
THE INSTALLATION PROCESS HAS
BEEN COMPLETED.
To Next Page
Loading...
