17
o Ensure the filter unclips from the hood, as shown in the diagram
on the previous page, before you pull it away. This will allow you
access to the motor where the carbon filter should be fitted.
o Hook the carbon filter which has two fixing pins (C) onto the
motor (D).
o Turn the carbon filter clockwise (F), until you feel it click into
place.
o Refit the filter, making sure it clips
back into the hood correctly.
o The carbon filters should be replaced
every three months, or if they show
signs of damage. To remove the
carbon filter, turn it anticlockwise so
it unlatches from the motor.
To Next Page
Loading...
