24
o Place the décor door on a protective surface to avoid damage.
Mark the installation position of the door frame and the size of
the fixed screws to ensure you do not drill too deeply and
damage the décor door.
o If the upper edge of the door is not as high as the upper edge of
the cupboards then you should adjust the size accordingly.
o Mark the positions of the screws on the door and ensure the size
is as accurate as 569+1 mm.
o Fix the fan-shaped door frame on the door with screws, making
sure the frames are symmetrical.
o Install the door onto the cooker hood. The two slides of the door
frames can be pulled to the end and door can be safely locked
into position by the plastic limit clips. This prevents accidental
removal of the door frame from the appliance.
o The two screws on both
sides of the cooker hood
can be adjusted to alter
the sliding of the door,
according to its weight.
To Next Page
Loading...
