17
o Press the Instant Start button (1) to confirm.
o Set the required cooking time or preheating time. In most cases
the oven has to be preheated for about 15 minutes before
placing food in the microwave in order to achieve best results.
Use the Weight.Time.Temp button (8) to decrease and the Auto
Cooking button (6) to increase the cooking time.
IMPORTANT: Preheating is not recommended in combination
programs. You should only preheat when using convection
only.
o Close the microwave oven door and press the Instant Start
button (1) to begin cooking. The LED display will count down to
show the remaining cooking time.
o As the temperature is increasing, the relevant LED on the display
will light to indicate the internal temperature. Once the oven has
reached the set temperature, the numbers will go steady and the
preheating process will be complete.
o If you turn the food during the cooking process, press the door
release button to access the food. Close the door again and
press the Instant Start button (1) to continue the cooking
procedure.
o If you wish to remove the food before the preset time, you must
press the Stop.Clear button (2) once to clear the preset program
to avoid unintended operation during next use.
o At the end of the cooking time, the LED display will show “End”
and 3 beeps will sound to prompt you to remove the food from
the microwave. If you do not press the Stop.Clear button (2)
once or open the door, the beep will sound every 3 minutes.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave. We would
recommend that you use an oven glove.
o After the food has been removed from the microwave, you
should make sure that the door is closed.
To Next Page
Loading...
