26
o If you wish to remove the food before the preset time, you must
press the Stop.Clear button (2) once to clear the preset program
to avoid unintended operation during next use.
o At the end of the cooking time, the LED display will show “End”
and 3 beeps will sound to prompt you to remove the food from
the microwave. If you do not press the Stop.Clear button (2)
once or open the door, the beep will sound every 3 minutes.
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave. We would
recommend that you use an oven glove.
o After the food has been removed from the microwave, you
should make sure that the door is closed.
Safety lock
o When the microwave is not heating, it is possible to switch on
the safety lock.
o Press and hold down the Stop.Clear button (2) for 3 seconds
until the LED display shows “OFF”.
o Until the safety lock is switched off, all buttons on the microwave
will be disabled.
o To switch off the safety lock, press and hold down the Stop.Clear
button (2) for 3 seconds until the LED display shows " : ".
Microwave cooking guidelines
o If you are heating liquid in the microwave, then you must also
place a teaspoon in the container. This will ensure that the liquid
does not boil suddenly after being removed from the microwave
cavity.
o This phenomenon is called “delayed boiling”, this means that a
liquid can be close to boiling point, even if there is no steam
coming off the liquid or the liquid is not bubbling. If the liquid
container is even gently shaken, then the liquid can without
warning boil over or even spurt. This could scald the end user.
o If the food you are cooking has a skin or peel (e.g. sausages,
tomatoes, potatoes etc), then you should pierce the skin or peel
with a fork. This will ensure that if steam is created during the
heating process, it can escape and the food will not burst.
To Next Page
Loading...
