25
o IMPORTANT: The inside of the microwave and the food that
you have been cooking may be extremely hot. So care should be
taken when removing items from the microwave. We would
recommend that you use an oven glove.
o After the food has been removed from the microwave, you
should make sure that the door is closed.
Multi-sequence cooking
To obtain the best cooking result, some recipes require different
cooking functions and times. You can program the microwave to follow
one program after another.
o Use the door release button to open the door of the microwave.
o Check that the turntable shaft, turntable ring assembly and glass
tray are correctly assembled in the cavity.
o Place whatever you are cooking in the centre of the microwave
cavity.
o Press the Stop.Clear button (2) once when the colon flashes on
the LED display.
o Select the first required function by pressing the microwave
power button (5) or the Convection Combi / Grill.Combi button
(4).
o Use the Weight.Time.Temp button (8) and the Auto Cooking
button (6) to set the desired cooking time for the first phase.
o Then select the second required function by pressing the
microwave power button (5) or the Convection Combi /
Grill.Combi button (4).
o Use the Weight.Time.Temp button (8) and the Auto Cooking
button (6) to set the desired cooking time for the second phase.
o A maximum of 4 phases can be set by following the above
instructions.
o Close the microwave oven door and press the Instant Start
button (1
) to begin cooking. The LED display will count down to
show the remaining cooking time. When the first phase has
finished, the second phase will begin automatically.
To Next Page
Loading...
