Cleaning the door
o To clean the edge around the outside of the door, you should use
a soft, damp cloth only.
o To prevent water from penetrating the door lock or electrical
components, DO NOT use a spray cleaner of any kind.
o DO NOT use any abrasive cleaner or scouring pads on the inner
or outer surfaces, as they may cause damage to them.
Installation
IMPORTANT: THIS INSTALLATION MUST BE
COMPLETED BY A SUITABLY QUALIFIED PERSON. WE
ONLY SANCTION THE INSTALLATION GIVEN IN THIS
INSTRUCTION MANUAL. YOU SHOULD DISPOSE OF
ALL PACKAGING IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
Aperture requirements
27
To Next Page
Loading...
